<tbody id="kga0c"></tbody> <tbody id="kga0c"></tbody> 
Source：Industry News Release time：2022-12-06 Clicks：0 Popular：Reduction motor manufacturer
Precautions for using right angle reducer:
1. Hammering is prohibited
When installing the output shaft of the right-angle reducer, do not directly hammer coupling components such as couplings, pulleys, and sprockets. Since the output shaft structure of the right-angle reducer cannot withstand axial hammering, the screws can be screwed into the screw holes at the shaft end and pressed into the coupling.
2. Be sure to install the ventilation cap (exhaust plug)
Before use, the blockage at the highest position should be replaced with an exhaust plug to ensure that the right-angle reducer can be exhausted during normal operation. If it is not replaced in time, the long running time of the reducer will cause the gas in the reducer to swell the oil seal, causing the reducer to leak oil.
Recommended reading
Reduction motor manufacturers introduce the product applications of reduction motors
Related Information
Rod motor
2021-04-17CGXZ115
2021-01-13Planetary reducer
2021-04-15CGF-060L1-10-P2
2020-12-21CGX142
2021-01-13CGXZ085
2021-01-13Planetary reducer
2021-04-15Governor
2020-12-21Planetary reducer
2020-12-21CGXK042
2021-01-13Stepper motor
2021-04-14Planetary reducer
2021-04-15CGXZK085
2021-01-13Stepper motor
2021-04-14Brake motor
2020-12-21Stepper motor
2020-12-21CGXK085
2021-01-13Speed control device
2021-01-13The main products include AC, DC, deceleration, speed regulation, brake motors, power 6W-3700W, linear motors (including flat plate, rod type)
13316953177 
13316953177
20 years of focus on R&D and production of reduction motors for automation equipment
CN
location：
<tbody id="kga0c"></tbody> <tbody id="kga0c"></tbody>